How to Clean Your Kissimmee Washing Machine Drain

Posted by on Nov 7, 2013 in Drain Cleaning Kissimmee

A stopped up washing machine drain can result in a myriad of issues for a homeowner. Not just can an obstructed drain potentially mean inefficient draining of water, it can likewise gradually bring about overflow. Cleaning a washing machine drain is basically an easy treatment, and in the end, will produce remarkable operation from your device says Drain Cleaning Kissimmee.

Before starting a task with electrical appliances, you need to unplug them to avoid accidental shock.

Clearing Obstructions From A Washing Machine Drain Is Simple

The drainage pipe is a huge, flexible pipe located on the back of the cleaning machine. It is connected with four screws and a plate. Initially, remove the screws from home plate with a screwdriver, and detach the pipe from the washing equipment. It is recommended to hold the pipe over a bucket to empty out any water that remains in the drain.

Disconnect the cleaning machine drain hose from the drain pipe. The curved end of the hose is situated on the top of the pipe, and is normally held by a piece of plastic tie or wire. Making use of wire cutters or scissors, cut the wire or tie to unleash the drain hose.

Next, insert a plumber’s snake into the drain pipe of the washing machine. Continue to advance it forward up until you satisfy with resistance. When this occurs, tighten the wing nut on the front of the plumbing professional’s snake, and twist the rotation knob on the backside of it. This will assist to split up any obstructions. Keep rotating the snake. Repeat this same process up until you no long feel resistence. This suggests that the drain is clear. Gradually pull the plumbing snake from completion of the drain pipe. If there was an obstruction in the drain, a things or mass will bring out the snake.

The drainage pipe can be replaced by reinsertion of the plate and screws. To eliminate any remnants of debris, run a cycle without any clothing with your washing machine.

Natural Cleaners Can Also Clear Out Washing Machine Drains

For small construct up and small clogs, there are non-caustic remedies that are best for cleaning washing machine drains. To use this homemade recipe, drain all the water out of your cleaning equipment. Pour one cup of baking soda into the drain of your machine. Then, pour two cups of boiling water into the drain. Enable 10 minutes for the mixture to procedure. Next, add an extra cup of baking soda straight followed by one cup of vinegar. Making use of a rubber stopper, plug the drain. The response of the active ingredients need to remove any undesirable material, and dissolve any little clogs. Pour at least a half a gallon of boiling water after 10 minutes to purge the staying rubble through the plumbing system.

For a more relentless obstruction, a more powerful option will should be used. For this mix, you will need cleaning soda. This can be discovered in the laundry cleaning agent area of the supermarket. Pour one cup of the cleaning soda down the drain. Let this sit in the drain for a number of hours. Then, pour one cup of baking soda and one-fourth cup of salt into the drain. These components can sit in the drain as little as one hour, and as long as overnight. Pour a compound of two cups of white vinegar and 2 cups of water slowly down the drain, waiting up until the foaming subsides. Finally, blow out the blend with hot water.

Here is another video that shows a similar process but with using bleach:

For more in depth information, check out PROBLEMS COMMON TO ALL WASHER BRANDS from Appliance Repair.

If you at any time feel uncomfortable cleaning out your washing machine drain, give Drain Cleaning Kissimmee a call for support.

 

Phil Luther is the founder of hotwaterheatermedic.com, allowing homeowners to connect with a reliable, dependable, professional plumbing repair company in their local area.  Follow me on Google +
Enhanced by Zemanta